Autogenerated HTML docs for v1.8.2-rc1
diff --git a/RelNotes/1.8.1.5.txt b/RelNotes/1.8.1.5.txt new file mode 100644 index 0000000..92da6b2 --- /dev/null +++ b/RelNotes/1.8.1.5.txt
@@ -0,0 +1,37 @@ +Git 1.8.1.5 Release Notes +========================= + +Fixes since v1.8.1.5 +-------------------- + + * "git apply --summary" has been taught to make sure the similarity + value shown in its output is sensible, even when the input had a + bogus value. + + * "git clean" showed what it was going to do, but sometimes ended + up finding that it was not allowed to do so, which resulted in a + confusing output (e.g. after saying that it will remove an + untracked directory, it found an embedded git repository there + which it is not allowed to remove). It now performs the actions + and then reports the outcome more faithfully. + + * "git clone" used to allow --bare and --separate-git-dir=$there + options at the same time, which was nonsensical. + + * "git cvsimport" mishandled timestamps at DST boundary. + + * We used to have an arbitrary 32 limit for combined diff input, + resulting in incorrect number of leading colons shown when showing + the "--raw --cc" output. + + * The smart HTTP clients forgot to verify the content-type that comes + back from the server side to make sure that the request is being + handled properly. + + * "git help remote-helpers" failed to find the documentation. + + * "gitweb" pages served over HTTPS, when configured to show picon or + gravatar, referred to these external resources to be fetched via + HTTP, resulting in mixed contents warning in browsers. + +Also contains various documentation fixes.
diff --git a/RelNotes/1.8.2.txt b/RelNotes/1.8.2.txt index a287f24..861ef02 100644 --- a/RelNotes/1.8.2.txt +++ b/RelNotes/1.8.2.txt
@@ -17,14 +17,14 @@ "git push $there tag v1.2.3" used to allow replacing a tag v1.2.3 that already exists in the repository $there, if the rewritten tag -you are pushing points at a commit that is a decendant of a commit +you are pushing points at a commit that is a descendant of a commit that the old tag v1.2.3 points at. This was found to be error prone and starting with this release, any attempt to update an existing ref under refs/tags/ hierarchy will fail, without "--force". When "git add -u" and "git add -A", that does not specify what paths to add on the command line, is run from inside a subdirectory, the -scope of the operation has always been limited to the subirectory. +scope of the operation has always been limited to the subdirectory. Many users found this counter-intuitive, given that "git commit -a" and other commands operate on the entire tree regardless of where you are. In this release, these commands give warning in such a case and @@ -125,7 +125,7 @@ string "v$count-" to the names of its output files, and also automatically sets the subject prefix to "PATCH v$count". This allows patches from rerolled series to be stored under different - names and makes it easier to reuse cover letter messsages. + names and makes it easier to reuse cover letter messages. * "git log" and friends can be told with --use-mailmap option to rewrite the names and email addresses of people using the mailmap @@ -295,7 +295,6 @@ * The smart HTTP clients forgot to verify the content-type that comes back from the server side to make sure that the request is being handled properly. - (merge 3443db5 sp/smart-http-content-type-check later to maint). * "git am" did not parse datestamp correctly from Hg generated patch, when it is run in a locale outside C (or en). @@ -306,7 +305,6 @@ * "git apply --summary" has been taught to make sure the similarity value shown in its output is sensible, even when the input had a bogus value. - (merge afcb6ac jk/apply-similaritly-parsing later to maint). * A tar archive created by "git archive" recorded a directory in a way that made NetBSD's implementation of "tar" sometimes unhappy. @@ -327,19 +325,16 @@ untracked directory, it found an embedded git repository there which it is not allowed to remove). It now performs the actions and then reports the outcome more faithfully. - (merge f538a91 zk/clean-report-failure later to maint). * When "git clone --separate-git-dir=$over_there" is interrupted, it failed to remove the real location of the $GIT_DIR it created. This was most visible when interrupting a submodule update. * "git cvsimport" mishandled timestamps at DST boundary. - (merge 48c9162 bw/get-tz-offset-perl later to maint). * We used to have an arbitrary 32 limit for combined diff input, resulting in incorrect number of leading colons shown when showing the "--raw --cc" output. - (merge edbc00e jc/combine-diff-many-parents later to maint). * "git fetch --depth" was broken in at least three ways. The resulting history was deeper than specified by one commit, it was @@ -349,7 +344,6 @@ * "git log --all -p" that walked refs/notes/textconv/ ref can later try to use the textconv data incorrectly after it gets freed. - (merge be5c9fb jk/read-commit-buffer-data-after-free later to maint). * We forgot to close the file descriptor reading from "gpg" output, killing "git log --show-signature" on a long history. @@ -374,7 +368,6 @@ * "git clone" used to allow --bare and --separate-git-dir=$there options at the same time, which was nonsensical. - (merge 95b63f1 nd/clone-no-separate-git-dir-with-bare later to maint). * "git rebase --preserve-merges" lost empty merges in recent versions of Git. @@ -409,7 +402,6 @@ * "gitweb" pages served over HTTPS, when configured to show picon or gravatar, referred to these external resources to be fetched via HTTP, resulting in mixed contents warning in browsers. - (merge 5748558 ab/gitweb-use-same-scheme later to maint). * When a line to be wrapped has a solid run of non space characters whose length exactly is the wrap width, "git shortlog -w" failed @@ -427,7 +419,7 @@ * "git push" was taught to refuse updating the branch that is currently checked out long time ago, but the user manual was left stale. - (merge d9be248 wk/man-deny-current-branch-is-default-these-days later to maint). + (merge 50995ed wk/man-deny-current-branch-is-default-these-days later to maint). * Some shells do not behave correctly when IFS is unset; work it around by explicitly setting it to the default value. @@ -446,7 +438,11 @@ * The autoconf subsystem passed --mandir down to generated config.mak.autogen but forgot to do the same for --htmldir. - (merge fc1c541 ct/autoconf-htmldir later to maint). + (merge 55d9bf0 ct/autoconf-htmldir later to maint). + + * A change made on v1.8.1.x maintenance track had a nasty regression + to break the build when autoconf is used. + (merge 7f1b697 jn/less-reconfigure later to maint). * We have been carrying a translated and long-unmaintained copy of an old version of the tutorial; removed.
diff --git a/config.txt b/config.txt index 3bb53da..bbba728 100644 --- a/config.txt +++ b/config.txt
@@ -182,7 +182,7 @@ Advice shown when linkgit:git-merge[1] refuses to merge to avoid overwriting local changes. resolveConflict:: - Advices shown by various commands when conflicts + Advice shown by various commands when conflicts prevent the operation from being performed. implicitIdentity:: Advice on how to set your identity configuration when
diff --git a/git-config.html b/git-config.html index e5f0059..f60ed81 100644 --- a/git-config.html +++ b/git-config.html
@@ -1507,7 +1507,7 @@ </dt> <dd> <p> - Advices shown by various commands when conflicts + Advice shown by various commands when conflicts prevent the operation from being performed. </p> </dd>
diff --git a/user-manual.html b/user-manual.html index 782f784..1f738a6 100644 --- a/user-manual.html +++ b/user-manual.html
@@ -1,5 +1,5 @@ <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"><title></title><link rel="stylesheet" href="docbook-xsl.css" type="text/css"><meta name="generator" content="DocBook XSL Stylesheets V1.75.2"></head><body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div lang="en" class="book"><div class="titlepage"><hr></div><div class="toc"><p><b>Table of Contents</b></p><dl><dt><span class="part"><a href="#_git_user_8217_s_manual_for_version_1_5_3_or_newer">I. Git User’s Manual (for version 1.5.3 or newer)</a></span></dt><dd><dl><dt><span class="chapter"><a href="#repositories-and-branches">1. Repositories and Branches</a></span></dt><dd><dl><dt><span class="section"><a href="#how-to-get-a-git-repository">How to get a Git repository</a></span></dt><dt><span class="section"><a href="#how-to-check-out">How to check out a different version of a project</a></span></dt><dt><span class="section"><a href="#understanding-commits">Understanding History: Commits</a></span></dt><dd><dl><dt><span class="section"><a href="#understanding-reachability">Understanding history: commits, parents, and reachability</a></span></dt><dt><span class="section"><a href="#history-diagrams">Understanding history: History diagrams</a></span></dt><dt><span class="section"><a href="#what-is-a-branch">Understanding history: What is a branch?</a></span></dt></dl></dd><dt><span class="section"><a href="#manipulating-branches">Manipulating branches</a></span></dt><dt><span class="section"><a href="#detached-head">Examining an old version without creating a new branch</a></span></dt><dt><span class="section"><a href="#examining-remote-branches">Examining branches from a remote repository</a></span></dt><dt><span class="section"><a href="#how-git-stores-references">Naming branches, tags, and other references</a></span></dt><dt><span class="section"><a href="#Updating-a-repository-With-git-fetch">Updating a repository with git fetch</a></span></dt><dt><span class="section"><a href="#fetching-branches">Fetching branches from other repositories</a></span></dt></dl></dd><dt><span class="chapter"><a href="#exploring-git-history">2. Exploring Git history</a></span></dt><dd><dl><dt><span class="section"><a href="#using-bisect">How to use bisect to find a regression</a></span></dt><dt><span class="section"><a href="#naming-commits">Naming commits</a></span></dt><dt><span class="section"><a href="#creating-tags">Creating tags</a></span></dt><dt><span class="section"><a href="#browsing-revisions">Browsing revisions</a></span></dt><dt><span class="section"><a href="#generating-diffs">Generating diffs</a></span></dt><dt><span class="section"><a href="#viewing-old-file-versions">Viewing old file versions</a></span></dt><dt><span class="section"><a href="#history-examples">Examples</a></span></dt><dd><dl><dt><span class="section"><a href="#counting-commits-on-a-branch">Counting the number of commits on a branch</a></span></dt><dt><span class="section"><a href="#checking-for-equal-branches">Check whether two branches point at the same history</a></span></dt><dt><span class="section"><a href="#finding-tagged-descendants">Find first tagged version including a given fix</a></span></dt><dt><span class="section"><a href="#showing-commits-unique-to-a-branch">Showing commits unique to a given branch</a></span></dt><dt><span class="section"><a href="#making-a-release">Creating a changelog and tarball for a software release</a></span></dt><dt><span class="section"><a href="#Finding-commits-With-given-Content">Finding commits referencing a file with given content</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#Developing-With-git">3. Developing with Git</a></span></dt><dd><dl><dt><span class="section"><a href="#telling-git-your-name">Telling Git your name</a></span></dt><dt><span class="section"><a href="#creating-a-new-repository">Creating a new repository</a></span></dt><dt><span class="section"><a href="#how-to-make-a-commit">How to make a commit</a></span></dt><dt><span class="section"><a href="#creating-good-commit-messages">Creating good commit messages</a></span></dt><dt><span class="section"><a href="#ignoring-files">Ignoring files</a></span></dt><dt><span class="section"><a href="#how-to-merge">How to merge</a></span></dt><dt><span class="section"><a href="#resolving-a-merge">Resolving a merge</a></span></dt><dd><dl><dt><span class="section"><a href="#conflict-resolution">Getting conflict-resolution help during a merge</a></span></dt></dl></dd><dt><span class="section"><a href="#undoing-a-merge">Undoing a merge</a></span></dt><dt><span class="section"><a href="#fast-forwards">Fast-forward merges</a></span></dt><dt><span class="section"><a href="#fixing-mistakes">Fixing mistakes</a></span></dt><dd><dl><dt><span class="section"><a href="#reverting-a-commit">Fixing a mistake with a new commit</a></span></dt><dt><span class="section"><a href="#fixing-a-mistake-by-rewriting-history">Fixing a mistake by rewriting history</a></span></dt><dt><span class="section"><a href="#checkout-of-path">Checking out an old version of a file</a></span></dt><dt><span class="section"><a href="#interrupted-work">Temporarily setting aside work in progress</a></span></dt></dl></dd><dt><span class="section"><a href="#ensuring-good-performance">Ensuring good performance</a></span></dt><dt><span class="section"><a href="#ensuring-reliability">Ensuring reliability</a></span></dt><dd><dl><dt><span class="section"><a href="#checking-for-corruption">Checking the repository for corruption</a></span></dt><dt><span class="section"><a href="#recovering-lost-changes">Recovering lost changes</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#sharing-development">4. Sharing development with others</a></span></dt><dd><dl><dt><span class="section"><a href="#getting-updates-With-git-pull">Getting updates with git pull</a></span></dt><dt><span class="section"><a href="#submitting-patches">Submitting patches to a project</a></span></dt><dt><span class="section"><a href="#importing-patches">Importing patches to a project</a></span></dt><dt><span class="section"><a href="#public-repositories">Public Git repositories</a></span></dt><dd><dl><dt><span class="section"><a href="#setting-up-a-public-repository">Setting up a public repository</a></span></dt><dt><span class="section"><a href="#exporting-via-git">Exporting a Git repository via the Git protocol</a></span></dt><dt><span class="section"><a href="#exporting-via-http">Exporting a git repository via HTTP</a></span></dt><dt><span class="section"><a href="#pushing-changes-to-a-public-repository">Pushing changes to a public repository</a></span></dt><dt><span class="section"><a href="#forcing-push">What to do when a push fails</a></span></dt><dt><span class="section"><a href="#setting-up-a-shared-repository">Setting up a shared repository</a></span></dt><dt><span class="section"><a href="#setting-up-gitweb">Allowing web browsing of a repository</a></span></dt></dl></dd><dt><span class="section"><a href="#sharing-development-examples">Examples</a></span></dt><dd><dl><dt><span class="section"><a href="#maintaining-topic-branches">Maintaining topic branches for a Linux subsystem maintainer</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#cleaning-up-history">5. Rewriting history and maintaining patch series</a></span></dt><dd><dl><dt><span class="section"><a href="#patch-series">Creating the perfect patch series</a></span></dt><dt><span class="section"><a href="#using-git-rebase">Keeping a patch series up to date using git rebase</a></span></dt><dt><span class="section"><a href="#rewriting-one-commit">Rewriting a single commit</a></span></dt><dt><span class="section"><a href="#reordering-patch-series">Reordering or selecting from a patch series</a></span></dt><dt><span class="section"><a href="#patch-series-tools">Other tools</a></span></dt><dt><span class="section"><a href="#problems-With-rewriting-history">Problems with rewriting history</a></span></dt><dt><span class="section"><a href="#bisect-merges">Why bisecting merge commits can be harder than bisecting linear history</a></span></dt></dl></dd><dt><span class="chapter"><a href="#advanced-branch-management">6. Advanced branch management</a></span></dt><dd><dl><dt><span class="section"><a href="#fetching-individual-branches">Fetching individual branches</a></span></dt><dt><span class="section"><a href="#fetch-fast-forwards">git fetch and fast-forwards</a></span></dt><dt><span class="section"><a href="#forcing-fetch">Forcing git fetch to do non-fast-forward updates</a></span></dt><dt><span class="section"><a href="#remote-branch-configuration">Configuring remote-tracking branches</a></span></dt></dl></dd><dt><span class="chapter"><a href="#git-concepts">7. Git concepts</a></span></dt><dd><dl><dt><span class="section"><a href="#the-object-database">The Object Database</a></span></dt><dd><dl><dt><span class="section"><a href="#commit-object">Commit Object</a></span></dt><dt><span class="section"><a href="#tree-object">Tree Object</a></span></dt><dt><span class="section"><a href="#blob-object">Blob Object</a></span></dt><dt><span class="section"><a href="#trust">Trust</a></span></dt><dt><span class="section"><a href="#tag-object">Tag Object</a></span></dt><dt><span class="section"><a href="#pack-files">How Git stores objects efficiently: pack files</a></span></dt><dt><span class="section"><a href="#dangling-objects">Dangling objects</a></span></dt><dt><span class="section"><a href="#recovering-from-repository-corruption">Recovering from repository corruption</a></span></dt></dl></dd><dt><span class="section"><a href="#the-index">The index</a></span></dt></dl></dd><dt><span class="chapter"><a href="#submodules">8. Submodules</a></span></dt><dd><dl><dt><span class="section"><a href="#_pitfalls_with_submodules">Pitfalls with submodules</a></span></dt></dl></dd><dt><span class="chapter"><a href="#low-level-operations">9. Low-level Git operations</a></span></dt><dd><dl><dt><span class="section"><a href="#object-manipulation">Object access and manipulation</a></span></dt><dt><span class="section"><a href="#the-workflow">The Workflow</a></span></dt><dd><dl><dt><span class="section"><a href="#working-directory-to-index">working directory → index</a></span></dt><dt><span class="section"><a href="#index-to-object-database">index → object database</a></span></dt><dt><span class="section"><a href="#object-database-to-index">object database → index</a></span></dt><dt><span class="section"><a href="#index-to-working-directory">index → working directory</a></span></dt><dt><span class="section"><a href="#tying-it-all-together">Tying it all together</a></span></dt></dl></dd><dt><span class="section"><a href="#examining-the-data">Examining the data</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees">Merging multiple trees</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees-2">Merging multiple trees, continued</a></span></dt></dl></dd><dt><span class="chapter"><a href="#hacking-git">10. Hacking Git</a></span></dt><dd><dl><dt><span class="section"><a href="#object-details">Object storage format</a></span></dt><dt><span class="section"><a href="#birdview-on-the-source-code">A birds-eye view of Git’s source code</a></span></dt></dl></dd><dt><span class="chapter"><a href="#glossary">11. Git Glossary</a></span></dt><dt><span class="appendix"><a href="#git-quick-start">A. Git Quick Reference</a></span></dt><dd><dl><dt><span class="section"><a href="#quick-creating-a-new-repository">Creating a new repository</a></span></dt><dt><span class="section"><a href="#managing-branches">Managing branches</a></span></dt><dt><span class="section"><a href="#exploring-history">Exploring history</a></span></dt><dt><span class="section"><a href="#making-changes">Making changes</a></span></dt><dt><span class="section"><a href="#merging">Merging</a></span></dt><dt><span class="section"><a href="#sharing-your-changes">Sharing your changes</a></span></dt><dt><span class="section"><a href="#repository-maintenance">Repository maintenance</a></span></dt></dl></dd><dt><span class="appendix"><a href="#todo">B. Notes and todo list for this manual</a></span></dt></dl></dd></dl></div><div class="part" title="Part I. Git User’s Manual (for version 1.5.3 or newer)"><div class="titlepage"><div><div><h1 class="title"><a name="_git_user_8217_s_manual_for_version_1_5_3_or_newer"></a>Part I. Git User’s Manual (for version 1.5.3 or newer)</h1></div></div></div><div class="toc"><p><b>Table of Contents</b></p><dl><dt><span class="chapter"><a href="#repositories-and-branches">1. Repositories and Branches</a></span></dt><dd><dl><dt><span class="section"><a href="#how-to-get-a-git-repository">How to get a Git repository</a></span></dt><dt><span class="section"><a href="#how-to-check-out">How to check out a different version of a project</a></span></dt><dt><span class="section"><a href="#understanding-commits">Understanding History: Commits</a></span></dt><dd><dl><dt><span class="section"><a href="#understanding-reachability">Understanding history: commits, parents, and reachability</a></span></dt><dt><span class="section"><a href="#history-diagrams">Understanding history: History diagrams</a></span></dt><dt><span class="section"><a href="#what-is-a-branch">Understanding history: What is a branch?</a></span></dt></dl></dd><dt><span class="section"><a href="#manipulating-branches">Manipulating branches</a></span></dt><dt><span class="section"><a href="#detached-head">Examining an old version without creating a new branch</a></span></dt><dt><span class="section"><a href="#examining-remote-branches">Examining branches from a remote repository</a></span></dt><dt><span class="section"><a href="#how-git-stores-references">Naming branches, tags, and other references</a></span></dt><dt><span class="section"><a href="#Updating-a-repository-With-git-fetch">Updating a repository with git fetch</a></span></dt><dt><span class="section"><a href="#fetching-branches">Fetching branches from other repositories</a></span></dt></dl></dd><dt><span class="chapter"><a href="#exploring-git-history">2. Exploring Git history</a></span></dt><dd><dl><dt><span class="section"><a href="#using-bisect">How to use bisect to find a regression</a></span></dt><dt><span class="section"><a href="#naming-commits">Naming commits</a></span></dt><dt><span class="section"><a href="#creating-tags">Creating tags</a></span></dt><dt><span class="section"><a href="#browsing-revisions">Browsing revisions</a></span></dt><dt><span class="section"><a href="#generating-diffs">Generating diffs</a></span></dt><dt><span class="section"><a href="#viewing-old-file-versions">Viewing old file versions</a></span></dt><dt><span class="section"><a href="#history-examples">Examples</a></span></dt><dd><dl><dt><span class="section"><a href="#counting-commits-on-a-branch">Counting the number of commits on a branch</a></span></dt><dt><span class="section"><a href="#checking-for-equal-branches">Check whether two branches point at the same history</a></span></dt><dt><span class="section"><a href="#finding-tagged-descendants">Find first tagged version including a given fix</a></span></dt><dt><span class="section"><a href="#showing-commits-unique-to-a-branch">Showing commits unique to a given branch</a></span></dt><dt><span class="section"><a href="#making-a-release">Creating a changelog and tarball for a software release</a></span></dt><dt><span class="section"><a href="#Finding-commits-With-given-Content">Finding commits referencing a file with given content</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#Developing-With-git">3. Developing with Git</a></span></dt><dd><dl><dt><span class="section"><a href="#telling-git-your-name">Telling Git your name</a></span></dt><dt><span class="section"><a href="#creating-a-new-repository">Creating a new repository</a></span></dt><dt><span class="section"><a href="#how-to-make-a-commit">How to make a commit</a></span></dt><dt><span class="section"><a href="#creating-good-commit-messages">Creating good commit messages</a></span></dt><dt><span class="section"><a href="#ignoring-files">Ignoring files</a></span></dt><dt><span class="section"><a href="#how-to-merge">How to merge</a></span></dt><dt><span class="section"><a href="#resolving-a-merge">Resolving a merge</a></span></dt><dd><dl><dt><span class="section"><a href="#conflict-resolution">Getting conflict-resolution help during a merge</a></span></dt></dl></dd><dt><span class="section"><a href="#undoing-a-merge">Undoing a merge</a></span></dt><dt><span class="section"><a href="#fast-forwards">Fast-forward merges</a></span></dt><dt><span class="section"><a href="#fixing-mistakes">Fixing mistakes</a></span></dt><dd><dl><dt><span class="section"><a href="#reverting-a-commit">Fixing a mistake with a new commit</a></span></dt><dt><span class="section"><a href="#fixing-a-mistake-by-rewriting-history">Fixing a mistake by rewriting history</a></span></dt><dt><span class="section"><a href="#checkout-of-path">Checking out an old version of a file</a></span></dt><dt><span class="section"><a href="#interrupted-work">Temporarily setting aside work in progress</a></span></dt></dl></dd><dt><span class="section"><a href="#ensuring-good-performance">Ensuring good performance</a></span></dt><dt><span class="section"><a href="#ensuring-reliability">Ensuring reliability</a></span></dt><dd><dl><dt><span class="section"><a href="#checking-for-corruption">Checking the repository for corruption</a></span></dt><dt><span class="section"><a href="#recovering-lost-changes">Recovering lost changes</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#sharing-development">4. Sharing development with others</a></span></dt><dd><dl><dt><span class="section"><a href="#getting-updates-With-git-pull">Getting updates with git pull</a></span></dt><dt><span class="section"><a href="#submitting-patches">Submitting patches to a project</a></span></dt><dt><span class="section"><a href="#importing-patches">Importing patches to a project</a></span></dt><dt><span class="section"><a href="#public-repositories">Public Git repositories</a></span></dt><dd><dl><dt><span class="section"><a href="#setting-up-a-public-repository">Setting up a public repository</a></span></dt><dt><span class="section"><a href="#exporting-via-git">Exporting a Git repository via the Git protocol</a></span></dt><dt><span class="section"><a href="#exporting-via-http">Exporting a git repository via HTTP</a></span></dt><dt><span class="section"><a href="#pushing-changes-to-a-public-repository">Pushing changes to a public repository</a></span></dt><dt><span class="section"><a href="#forcing-push">What to do when a push fails</a></span></dt><dt><span class="section"><a href="#setting-up-a-shared-repository">Setting up a shared repository</a></span></dt><dt><span class="section"><a href="#setting-up-gitweb">Allowing web browsing of a repository</a></span></dt></dl></dd><dt><span class="section"><a href="#sharing-development-examples">Examples</a></span></dt><dd><dl><dt><span class="section"><a href="#maintaining-topic-branches">Maintaining topic branches for a Linux subsystem maintainer</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#cleaning-up-history">5. Rewriting history and maintaining patch series</a></span></dt><dd><dl><dt><span class="section"><a href="#patch-series">Creating the perfect patch series</a></span></dt><dt><span class="section"><a href="#using-git-rebase">Keeping a patch series up to date using git rebase</a></span></dt><dt><span class="section"><a href="#rewriting-one-commit">Rewriting a single commit</a></span></dt><dt><span class="section"><a href="#reordering-patch-series">Reordering or selecting from a patch series</a></span></dt><dt><span class="section"><a href="#patch-series-tools">Other tools</a></span></dt><dt><span class="section"><a href="#problems-With-rewriting-history">Problems with rewriting history</a></span></dt><dt><span class="section"><a href="#bisect-merges">Why bisecting merge commits can be harder than bisecting linear history</a></span></dt></dl></dd><dt><span class="chapter"><a href="#advanced-branch-management">6. Advanced branch management</a></span></dt><dd><dl><dt><span class="section"><a href="#fetching-individual-branches">Fetching individual branches</a></span></dt><dt><span class="section"><a href="#fetch-fast-forwards">git fetch and fast-forwards</a></span></dt><dt><span class="section"><a href="#forcing-fetch">Forcing git fetch to do non-fast-forward updates</a></span></dt><dt><span class="section"><a href="#remote-branch-configuration">Configuring remote-tracking branches</a></span></dt></dl></dd><dt><span class="chapter"><a href="#git-concepts">7. Git concepts</a></span></dt><dd><dl><dt><span class="section"><a href="#the-object-database">The Object Database</a></span></dt><dd><dl><dt><span class="section"><a href="#commit-object">Commit Object</a></span></dt><dt><span class="section"><a href="#tree-object">Tree Object</a></span></dt><dt><span class="section"><a href="#blob-object">Blob Object</a></span></dt><dt><span class="section"><a href="#trust">Trust</a></span></dt><dt><span class="section"><a href="#tag-object">Tag Object</a></span></dt><dt><span class="section"><a href="#pack-files">How Git stores objects efficiently: pack files</a></span></dt><dt><span class="section"><a href="#dangling-objects">Dangling objects</a></span></dt><dt><span class="section"><a href="#recovering-from-repository-corruption">Recovering from repository corruption</a></span></dt></dl></dd><dt><span class="section"><a href="#the-index">The index</a></span></dt></dl></dd><dt><span class="chapter"><a href="#submodules">8. Submodules</a></span></dt><dd><dl><dt><span class="section"><a href="#_pitfalls_with_submodules">Pitfalls with submodules</a></span></dt></dl></dd><dt><span class="chapter"><a href="#low-level-operations">9. Low-level Git operations</a></span></dt><dd><dl><dt><span class="section"><a href="#object-manipulation">Object access and manipulation</a></span></dt><dt><span class="section"><a href="#the-workflow">The Workflow</a></span></dt><dd><dl><dt><span class="section"><a href="#working-directory-to-index">working directory → index</a></span></dt><dt><span class="section"><a href="#index-to-object-database">index → object database</a></span></dt><dt><span class="section"><a href="#object-database-to-index">object database → index</a></span></dt><dt><span class="section"><a href="#index-to-working-directory">index → working directory</a></span></dt><dt><span class="section"><a href="#tying-it-all-together">Tying it all together</a></span></dt></dl></dd><dt><span class="section"><a href="#examining-the-data">Examining the data</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees">Merging multiple trees</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees-2">Merging multiple trees, continued</a></span></dt></dl></dd><dt><span class="chapter"><a href="#hacking-git">10. Hacking Git</a></span></dt><dd><dl><dt><span class="section"><a href="#object-details">Object storage format</a></span></dt><dt><span class="section"><a href="#birdview-on-the-source-code">A birds-eye view of Git’s source code</a></span></dt></dl></dd><dt><span class="chapter"><a href="#glossary">11. Git Glossary</a></span></dt><dt><span class="appendix"><a href="#git-quick-start">A. Git Quick Reference</a></span></dt><dd><dl><dt><span class="section"><a href="#quick-creating-a-new-repository">Creating a new repository</a></span></dt><dt><span class="section"><a href="#managing-branches">Managing branches</a></span></dt><dt><span class="section"><a href="#exploring-history">Exploring history</a></span></dt><dt><span class="section"><a href="#making-changes">Making changes</a></span></dt><dt><span class="section"><a href="#merging">Merging</a></span></dt><dt><span class="section"><a href="#sharing-your-changes">Sharing your changes</a></span></dt><dt><span class="section"><a href="#repository-maintenance">Repository maintenance</a></span></dt></dl></dd><dt><span class="appendix"><a href="#todo">B. Notes and todo list for this manual</a></span></dt></dl></div><p>Git is a fast distributed revision control system.</p><p>This manual is designed to be readable by someone with basic UNIX +<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"><title></title><link rel="stylesheet" href="docbook-xsl.css" type="text/css"><meta name="generator" content="DocBook XSL Stylesheets V1.75.2"></head><body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div lang="en" class="book"><div class="titlepage"><hr></div><div class="toc"><p><b>Table of Contents</b></p><dl><dt><span class="part"><a href="#_git_user_8217_s_manual_for_version_1_5_3_or_newer">I. Git User’s Manual (for version 1.5.3 or newer)</a></span></dt><dd><dl><dt><span class="chapter"><a href="#repositories-and-branches">1. Repositories and Branches</a></span></dt><dd><dl><dt><span class="section"><a href="#how-to-get-a-git-repository">How to get a Git repository</a></span></dt><dt><span class="section"><a href="#how-to-check-out">How to check out a different version of a project</a></span></dt><dt><span class="section"><a href="#understanding-commits">Understanding History: Commits</a></span></dt><dd><dl><dt><span class="section"><a href="#understanding-reachability">Understanding history: commits, parents, and reachability</a></span></dt><dt><span class="section"><a href="#history-diagrams">Understanding history: History diagrams</a></span></dt><dt><span class="section"><a href="#what-is-a-branch">Understanding history: What is a branch?</a></span></dt></dl></dd><dt><span class="section"><a href="#manipulating-branches">Manipulating branches</a></span></dt><dt><span class="section"><a href="#detached-head">Examining an old version without creating a new branch</a></span></dt><dt><span class="section"><a href="#examining-remote-branches">Examining branches from a remote repository</a></span></dt><dt><span class="section"><a href="#how-git-stores-references">Naming branches, tags, and other references</a></span></dt><dt><span class="section"><a href="#Updating-a-repository-With-git-fetch">Updating a repository with git fetch</a></span></dt><dt><span class="section"><a href="#fetching-branches">Fetching branches from other repositories</a></span></dt></dl></dd><dt><span class="chapter"><a href="#exploring-git-history">2. Exploring Git history</a></span></dt><dd><dl><dt><span class="section"><a href="#using-bisect">How to use bisect to find a regression</a></span></dt><dt><span class="section"><a href="#naming-commits">Naming commits</a></span></dt><dt><span class="section"><a href="#creating-tags">Creating tags</a></span></dt><dt><span class="section"><a href="#browsing-revisions">Browsing revisions</a></span></dt><dt><span class="section"><a href="#generating-diffs">Generating diffs</a></span></dt><dt><span class="section"><a href="#viewing-old-file-versions">Viewing old file versions</a></span></dt><dt><span class="section"><a href="#history-examples">Examples</a></span></dt><dd><dl><dt><span class="section"><a href="#counting-commits-on-a-branch">Counting the number of commits on a branch</a></span></dt><dt><span class="section"><a href="#checking-for-equal-branches">Check whether two branches point at the same history</a></span></dt><dt><span class="section"><a href="#finding-tagged-descendants">Find first tagged version including a given fix</a></span></dt><dt><span class="section"><a href="#showing-commits-unique-to-a-branch">Showing commits unique to a given branch</a></span></dt><dt><span class="section"><a href="#making-a-release">Creating a changelog and tarball for a software release</a></span></dt><dt><span class="section"><a href="#Finding-commits-With-given-Content">Finding commits referencing a file with given content</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#Developing-With-git">3. Developing with Git</a></span></dt><dd><dl><dt><span class="section"><a href="#telling-git-your-name">Telling Git your name</a></span></dt><dt><span class="section"><a href="#creating-a-new-repository">Creating a new repository</a></span></dt><dt><span class="section"><a href="#how-to-make-a-commit">How to make a commit</a></span></dt><dt><span class="section"><a href="#creating-good-commit-messages">Creating good commit messages</a></span></dt><dt><span class="section"><a href="#ignoring-files">Ignoring files</a></span></dt><dt><span class="section"><a href="#how-to-merge">How to merge</a></span></dt><dt><span class="section"><a href="#resolving-a-merge">Resolving a merge</a></span></dt><dd><dl><dt><span class="section"><a href="#conflict-resolution">Getting conflict-resolution help during a merge</a></span></dt></dl></dd><dt><span class="section"><a href="#undoing-a-merge">Undoing a merge</a></span></dt><dt><span class="section"><a href="#fast-forwards">Fast-forward merges</a></span></dt><dt><span class="section"><a href="#fixing-mistakes">Fixing mistakes</a></span></dt><dd><dl><dt><span class="section"><a href="#reverting-a-commit">Fixing a mistake with a new commit</a></span></dt><dt><span class="section"><a href="#fixing-a-mistake-by-rewriting-history">Fixing a mistake by rewriting history</a></span></dt><dt><span class="section"><a href="#checkout-of-path">Checking out an old version of a file</a></span></dt><dt><span class="section"><a href="#interrupted-work">Temporarily setting aside work in progress</a></span></dt></dl></dd><dt><span class="section"><a href="#ensuring-good-performance">Ensuring good performance</a></span></dt><dt><span class="section"><a href="#ensuring-reliability">Ensuring reliability</a></span></dt><dd><dl><dt><span class="section"><a href="#checking-for-corruption">Checking the repository for corruption</a></span></dt><dt><span class="section"><a href="#recovering-lost-changes">Recovering lost changes</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#sharing-development">4. Sharing development with others</a></span></dt><dd><dl><dt><span class="section"><a href="#getting-updates-With-git-pull">Getting updates with git pull</a></span></dt><dt><span class="section"><a href="#submitting-patches">Submitting patches to a project</a></span></dt><dt><span class="section"><a href="#importing-patches">Importing patches to a project</a></span></dt><dt><span class="section"><a href="#public-repositories">Public Git repositories</a></span></dt><dd><dl><dt><span class="section"><a href="#setting-up-a-public-repository">Setting up a public repository</a></span></dt><dt><span class="section"><a href="#exporting-via-git">Exporting a Git repository via the Git protocol</a></span></dt><dt><span class="section"><a href="#exporting-via-http">Exporting a git repository via HTTP</a></span></dt><dt><span class="section"><a href="#pushing-changes-to-a-public-repository">Pushing changes to a public repository</a></span></dt><dt><span class="section"><a href="#forcing-push">What to do when a push fails</a></span></dt><dt><span class="section"><a href="#setting-up-a-shared-repository">Setting up a shared repository</a></span></dt><dt><span class="section"><a href="#setting-up-gitweb">Allowing web browsing of a repository</a></span></dt></dl></dd><dt><span class="section"><a href="#sharing-development-examples">Examples</a></span></dt><dd><dl><dt><span class="section"><a href="#maintaining-topic-branches">Maintaining topic branches for a Linux subsystem maintainer</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#cleaning-up-history">5. Rewriting history and maintaining patch series</a></span></dt><dd><dl><dt><span class="section"><a href="#patch-series">Creating the perfect patch series</a></span></dt><dt><span class="section"><a href="#using-git-rebase">Keeping a patch series up to date using git rebase</a></span></dt><dt><span class="section"><a href="#rewriting-one-commit">Rewriting a single commit</a></span></dt><dt><span class="section"><a href="#reordering-patch-series">Reordering or selecting from a patch series</a></span></dt><dt><span class="section"><a href="#interactive-rebase">Using interactive rebases</a></span></dt><dt><span class="section"><a href="#patch-series-tools">Other tools</a></span></dt><dt><span class="section"><a href="#problems-With-rewriting-history">Problems with rewriting history</a></span></dt><dt><span class="section"><a href="#bisect-merges">Why bisecting merge commits can be harder than bisecting linear history</a></span></dt></dl></dd><dt><span class="chapter"><a href="#advanced-branch-management">6. Advanced branch management</a></span></dt><dd><dl><dt><span class="section"><a href="#fetching-individual-branches">Fetching individual branches</a></span></dt><dt><span class="section"><a href="#fetch-fast-forwards">git fetch and fast-forwards</a></span></dt><dt><span class="section"><a href="#forcing-fetch">Forcing git fetch to do non-fast-forward updates</a></span></dt><dt><span class="section"><a href="#remote-branch-configuration">Configuring remote-tracking branches</a></span></dt></dl></dd><dt><span class="chapter"><a href="#git-concepts">7. Git concepts</a></span></dt><dd><dl><dt><span class="section"><a href="#the-object-database">The Object Database</a></span></dt><dd><dl><dt><span class="section"><a href="#commit-object">Commit Object</a></span></dt><dt><span class="section"><a href="#tree-object">Tree Object</a></span></dt><dt><span class="section"><a href="#blob-object">Blob Object</a></span></dt><dt><span class="section"><a href="#trust">Trust</a></span></dt><dt><span class="section"><a href="#tag-object">Tag Object</a></span></dt><dt><span class="section"><a href="#pack-files">How Git stores objects efficiently: pack files</a></span></dt><dt><span class="section"><a href="#dangling-objects">Dangling objects</a></span></dt><dt><span class="section"><a href="#recovering-from-repository-corruption">Recovering from repository corruption</a></span></dt></dl></dd><dt><span class="section"><a href="#the-index">The index</a></span></dt></dl></dd><dt><span class="chapter"><a href="#submodules">8. Submodules</a></span></dt><dd><dl><dt><span class="section"><a href="#_pitfalls_with_submodules">Pitfalls with submodules</a></span></dt></dl></dd><dt><span class="chapter"><a href="#low-level-operations">9. Low-level Git operations</a></span></dt><dd><dl><dt><span class="section"><a href="#object-manipulation">Object access and manipulation</a></span></dt><dt><span class="section"><a href="#the-workflow">The Workflow</a></span></dt><dd><dl><dt><span class="section"><a href="#working-directory-to-index">working directory → index</a></span></dt><dt><span class="section"><a href="#index-to-object-database">index → object database</a></span></dt><dt><span class="section"><a href="#object-database-to-index">object database → index</a></span></dt><dt><span class="section"><a href="#index-to-working-directory">index → working directory</a></span></dt><dt><span class="section"><a href="#tying-it-all-together">Tying it all together</a></span></dt></dl></dd><dt><span class="section"><a href="#examining-the-data">Examining the data</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees">Merging multiple trees</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees-2">Merging multiple trees, continued</a></span></dt></dl></dd><dt><span class="chapter"><a href="#hacking-git">10. Hacking Git</a></span></dt><dd><dl><dt><span class="section"><a href="#object-details">Object storage format</a></span></dt><dt><span class="section"><a href="#birdview-on-the-source-code">A birds-eye view of Git’s source code</a></span></dt></dl></dd><dt><span class="chapter"><a href="#glossary">11. Git Glossary</a></span></dt><dt><span class="appendix"><a href="#git-quick-start">A. Git Quick Reference</a></span></dt><dd><dl><dt><span class="section"><a href="#quick-creating-a-new-repository">Creating a new repository</a></span></dt><dt><span class="section"><a href="#managing-branches">Managing branches</a></span></dt><dt><span class="section"><a href="#exploring-history">Exploring history</a></span></dt><dt><span class="section"><a href="#making-changes">Making changes</a></span></dt><dt><span class="section"><a href="#merging">Merging</a></span></dt><dt><span class="section"><a href="#sharing-your-changes">Sharing your changes</a></span></dt><dt><span class="section"><a href="#repository-maintenance">Repository maintenance</a></span></dt></dl></dd><dt><span class="appendix"><a href="#todo">B. Notes and todo list for this manual</a></span></dt></dl></dd></dl></div><div class="part" title="Part I. Git User’s Manual (for version 1.5.3 or newer)"><div class="titlepage"><div><div><h1 class="title"><a name="_git_user_8217_s_manual_for_version_1_5_3_or_newer"></a>Part I. Git User’s Manual (for version 1.5.3 or newer)</h1></div></div></div><div class="toc"><p><b>Table of Contents</b></p><dl><dt><span class="chapter"><a href="#repositories-and-branches">1. Repositories and Branches</a></span></dt><dd><dl><dt><span class="section"><a href="#how-to-get-a-git-repository">How to get a Git repository</a></span></dt><dt><span class="section"><a href="#how-to-check-out">How to check out a different version of a project</a></span></dt><dt><span class="section"><a href="#understanding-commits">Understanding History: Commits</a></span></dt><dd><dl><dt><span class="section"><a href="#understanding-reachability">Understanding history: commits, parents, and reachability</a></span></dt><dt><span class="section"><a href="#history-diagrams">Understanding history: History diagrams</a></span></dt><dt><span class="section"><a href="#what-is-a-branch">Understanding history: What is a branch?</a></span></dt></dl></dd><dt><span class="section"><a href="#manipulating-branches">Manipulating branches</a></span></dt><dt><span class="section"><a href="#detached-head">Examining an old version without creating a new branch</a></span></dt><dt><span class="section"><a href="#examining-remote-branches">Examining branches from a remote repository</a></span></dt><dt><span class="section"><a href="#how-git-stores-references">Naming branches, tags, and other references</a></span></dt><dt><span class="section"><a href="#Updating-a-repository-With-git-fetch">Updating a repository with git fetch</a></span></dt><dt><span class="section"><a href="#fetching-branches">Fetching branches from other repositories</a></span></dt></dl></dd><dt><span class="chapter"><a href="#exploring-git-history">2. Exploring Git history</a></span></dt><dd><dl><dt><span class="section"><a href="#using-bisect">How to use bisect to find a regression</a></span></dt><dt><span class="section"><a href="#naming-commits">Naming commits</a></span></dt><dt><span class="section"><a href="#creating-tags">Creating tags</a></span></dt><dt><span class="section"><a href="#browsing-revisions">Browsing revisions</a></span></dt><dt><span class="section"><a href="#generating-diffs">Generating diffs</a></span></dt><dt><span class="section"><a href="#viewing-old-file-versions">Viewing old file versions</a></span></dt><dt><span class="section"><a href="#history-examples">Examples</a></span></dt><dd><dl><dt><span class="section"><a href="#counting-commits-on-a-branch">Counting the number of commits on a branch</a></span></dt><dt><span class="section"><a href="#checking-for-equal-branches">Check whether two branches point at the same history</a></span></dt><dt><span class="section"><a href="#finding-tagged-descendants">Find first tagged version including a given fix</a></span></dt><dt><span class="section"><a href="#showing-commits-unique-to-a-branch">Showing commits unique to a given branch</a></span></dt><dt><span class="section"><a href="#making-a-release">Creating a changelog and tarball for a software release</a></span></dt><dt><span class="section"><a href="#Finding-commits-With-given-Content">Finding commits referencing a file with given content</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#Developing-With-git">3. Developing with Git</a></span></dt><dd><dl><dt><span class="section"><a href="#telling-git-your-name">Telling Git your name</a></span></dt><dt><span class="section"><a href="#creating-a-new-repository">Creating a new repository</a></span></dt><dt><span class="section"><a href="#how-to-make-a-commit">How to make a commit</a></span></dt><dt><span class="section"><a href="#creating-good-commit-messages">Creating good commit messages</a></span></dt><dt><span class="section"><a href="#ignoring-files">Ignoring files</a></span></dt><dt><span class="section"><a href="#how-to-merge">How to merge</a></span></dt><dt><span class="section"><a href="#resolving-a-merge">Resolving a merge</a></span></dt><dd><dl><dt><span class="section"><a href="#conflict-resolution">Getting conflict-resolution help during a merge</a></span></dt></dl></dd><dt><span class="section"><a href="#undoing-a-merge">Undoing a merge</a></span></dt><dt><span class="section"><a href="#fast-forwards">Fast-forward merges</a></span></dt><dt><span class="section"><a href="#fixing-mistakes">Fixing mistakes</a></span></dt><dd><dl><dt><span class="section"><a href="#reverting-a-commit">Fixing a mistake with a new commit</a></span></dt><dt><span class="section"><a href="#fixing-a-mistake-by-rewriting-history">Fixing a mistake by rewriting history</a></span></dt><dt><span class="section"><a href="#checkout-of-path">Checking out an old version of a file</a></span></dt><dt><span class="section"><a href="#interrupted-work">Temporarily setting aside work in progress</a></span></dt></dl></dd><dt><span class="section"><a href="#ensuring-good-performance">Ensuring good performance</a></span></dt><dt><span class="section"><a href="#ensuring-reliability">Ensuring reliability</a></span></dt><dd><dl><dt><span class="section"><a href="#checking-for-corruption">Checking the repository for corruption</a></span></dt><dt><span class="section"><a href="#recovering-lost-changes">Recovering lost changes</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#sharing-development">4. Sharing development with others</a></span></dt><dd><dl><dt><span class="section"><a href="#getting-updates-With-git-pull">Getting updates with git pull</a></span></dt><dt><span class="section"><a href="#submitting-patches">Submitting patches to a project</a></span></dt><dt><span class="section"><a href="#importing-patches">Importing patches to a project</a></span></dt><dt><span class="section"><a href="#public-repositories">Public Git repositories</a></span></dt><dd><dl><dt><span class="section"><a href="#setting-up-a-public-repository">Setting up a public repository</a></span></dt><dt><span class="section"><a href="#exporting-via-git">Exporting a Git repository via the Git protocol</a></span></dt><dt><span class="section"><a href="#exporting-via-http">Exporting a git repository via HTTP</a></span></dt><dt><span class="section"><a href="#pushing-changes-to-a-public-repository">Pushing changes to a public repository</a></span></dt><dt><span class="section"><a href="#forcing-push">What to do when a push fails</a></span></dt><dt><span class="section"><a href="#setting-up-a-shared-repository">Setting up a shared repository</a></span></dt><dt><span class="section"><a href="#setting-up-gitweb">Allowing web browsing of a repository</a></span></dt></dl></dd><dt><span class="section"><a href="#sharing-development-examples">Examples</a></span></dt><dd><dl><dt><span class="section"><a href="#maintaining-topic-branches">Maintaining topic branches for a Linux subsystem maintainer</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="#cleaning-up-history">5. Rewriting history and maintaining patch series</a></span></dt><dd><dl><dt><span class="section"><a href="#patch-series">Creating the perfect patch series</a></span></dt><dt><span class="section"><a href="#using-git-rebase">Keeping a patch series up to date using git rebase</a></span></dt><dt><span class="section"><a href="#rewriting-one-commit">Rewriting a single commit</a></span></dt><dt><span class="section"><a href="#reordering-patch-series">Reordering or selecting from a patch series</a></span></dt><dt><span class="section"><a href="#interactive-rebase">Using interactive rebases</a></span></dt><dt><span class="section"><a href="#patch-series-tools">Other tools</a></span></dt><dt><span class="section"><a href="#problems-With-rewriting-history">Problems with rewriting history</a></span></dt><dt><span class="section"><a href="#bisect-merges">Why bisecting merge commits can be harder than bisecting linear history</a></span></dt></dl></dd><dt><span class="chapter"><a href="#advanced-branch-management">6. Advanced branch management</a></span></dt><dd><dl><dt><span class="section"><a href="#fetching-individual-branches">Fetching individual branches</a></span></dt><dt><span class="section"><a href="#fetch-fast-forwards">git fetch and fast-forwards</a></span></dt><dt><span class="section"><a href="#forcing-fetch">Forcing git fetch to do non-fast-forward updates</a></span></dt><dt><span class="section"><a href="#remote-branch-configuration">Configuring remote-tracking branches</a></span></dt></dl></dd><dt><span class="chapter"><a href="#git-concepts">7. Git concepts</a></span></dt><dd><dl><dt><span class="section"><a href="#the-object-database">The Object Database</a></span></dt><dd><dl><dt><span class="section"><a href="#commit-object">Commit Object</a></span></dt><dt><span class="section"><a href="#tree-object">Tree Object</a></span></dt><dt><span class="section"><a href="#blob-object">Blob Object</a></span></dt><dt><span class="section"><a href="#trust">Trust</a></span></dt><dt><span class="section"><a href="#tag-object">Tag Object</a></span></dt><dt><span class="section"><a href="#pack-files">How Git stores objects efficiently: pack files</a></span></dt><dt><span class="section"><a href="#dangling-objects">Dangling objects</a></span></dt><dt><span class="section"><a href="#recovering-from-repository-corruption">Recovering from repository corruption</a></span></dt></dl></dd><dt><span class="section"><a href="#the-index">The index</a></span></dt></dl></dd><dt><span class="chapter"><a href="#submodules">8. Submodules</a></span></dt><dd><dl><dt><span class="section"><a href="#_pitfalls_with_submodules">Pitfalls with submodules</a></span></dt></dl></dd><dt><span class="chapter"><a href="#low-level-operations">9. Low-level Git operations</a></span></dt><dd><dl><dt><span class="section"><a href="#object-manipulation">Object access and manipulation</a></span></dt><dt><span class="section"><a href="#the-workflow">The Workflow</a></span></dt><dd><dl><dt><span class="section"><a href="#working-directory-to-index">working directory → index</a></span></dt><dt><span class="section"><a href="#index-to-object-database">index → object database</a></span></dt><dt><span class="section"><a href="#object-database-to-index">object database → index</a></span></dt><dt><span class="section"><a href="#index-to-working-directory">index → working directory</a></span></dt><dt><span class="section"><a href="#tying-it-all-together">Tying it all together</a></span></dt></dl></dd><dt><span class="section"><a href="#examining-the-data">Examining the data</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees">Merging multiple trees</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees-2">Merging multiple trees, continued</a></span></dt></dl></dd><dt><span class="chapter"><a href="#hacking-git">10. Hacking Git</a></span></dt><dd><dl><dt><span class="section"><a href="#object-details">Object storage format</a></span></dt><dt><span class="section"><a href="#birdview-on-the-source-code">A birds-eye view of Git’s source code</a></span></dt></dl></dd><dt><span class="chapter"><a href="#glossary">11. Git Glossary</a></span></dt><dt><span class="appendix"><a href="#git-quick-start">A. Git Quick Reference</a></span></dt><dd><dl><dt><span class="section"><a href="#quick-creating-a-new-repository">Creating a new repository</a></span></dt><dt><span class="section"><a href="#managing-branches">Managing branches</a></span></dt><dt><span class="section"><a href="#exploring-history">Exploring history</a></span></dt><dt><span class="section"><a href="#making-changes">Making changes</a></span></dt><dt><span class="section"><a href="#merging">Merging</a></span></dt><dt><span class="section"><a href="#sharing-your-changes">Sharing your changes</a></span></dt><dt><span class="section"><a href="#repository-maintenance">Repository maintenance</a></span></dt></dl></dd><dt><span class="appendix"><a href="#todo">B. Notes and todo list for this manual</a></span></dt></dl></div><p>Git is a fast distributed revision control system.</p><p>This manual is designed to be readable by someone with basic UNIX command-line skills, but no previous knowledge of Git.</p><p><a class="xref" href="#repositories-and-branches" title="Chapter 1. Repositories and Branches">Chapter 1, <i>Repositories and Branches</i></a> and <a class="xref" href="#exploring-git-history" title="Chapter 2. Exploring Git history">Chapter 2, <i>Exploring Git history</i></a> explain how to fetch and study a project using git—read these chapters to learn how to build and test a particular version of a software project, search for @@ -795,7 +795,7 @@ <a class="link" href="#def_bare_repository">bare</a> repository. You can also push to a repository that has a checked-out working tree, but a push to update the currently checked-out branch is denied by default to prevent confusion. -See the description ofthe receive.denyCurrentBranch option +See the description of the receive.denyCurrentBranch option in <a class="ulink" href="git-config.html" target="_top">git-config(1)</a> for details.</p><p>As with <code class="literal">git fetch</code>, you may also set up configuration options to save typing; so, for example:</p><pre class="literallayout">$ git remote add public-repo ssh://yourserver.com/~you/proj.git</pre><p>adds the following to <code class="literal">.git/config</code>:</p><pre class="literallayout">[remote "public-repo"] url = yourserver.com:proj.git @@ -913,8 +913,10 @@ You detect this when the output from:</p><pre class="literallayout">$ git log origin..branchname</pre><p>is empty. At this point the branch can be deleted:</p><pre class="literallayout">$ git branch -d branchname</pre><p>Some changes are so trivial that it is not necessary to create a separate branch and then merge into each of the test and release branches. For these changes, just apply directly to the "release" branch, and then -merge that into the "test" branch.</p><p>To create diffstat and shortlog summaries of changes to include in a "please -pull" request to Linus you can use:</p><pre class="literallayout">$ git diff --stat origin..release</pre><p>and</p><pre class="literallayout">$ git log -p origin..release | git shortlog</pre><p>Here are some of the scripts that simplify all this even further.</p><pre class="literallayout">==== update script ==== +merge that into the "test" branch.</p><p>After pushing your work to <code class="literal">mytree</code>, you can use +<a class="ulink" href="git-request-pull.html" target="_top">git-request-pull(1)</a> to prepare a "please pull" request message +to send to Linus:</p><pre class="literallayout">$ git push mytree +$ git request-pull origin mytree release</pre><p>Here are some of the scripts that simplify all this even further.</p><pre class="literallayout">==== update script ==== # Update a branch in my Git tree. If the branch to be updated # is origin, then pull from kernel.org. Otherwise merge # origin/master branch into test|release branch @@ -1011,7 +1013,7 @@ ;; esac git log origin/master..$branch | git shortlog -done</pre></div></div></div><div class="chapter" title="Chapter 5. Rewriting history and maintaining patch series"><div class="titlepage"><div><div><h2 class="title"><a name="cleaning-up-history"></a>Chapter 5. Rewriting history and maintaining patch series</h2></div></div></div><div class="toc"><p><b>Table of Contents</b></p><dl><dt><span class="section"><a href="#patch-series">Creating the perfect patch series</a></span></dt><dt><span class="section"><a href="#using-git-rebase">Keeping a patch series up to date using git rebase</a></span></dt><dt><span class="section"><a href="#rewriting-one-commit">Rewriting a single commit</a></span></dt><dt><span class="section"><a href="#reordering-patch-series">Reordering or selecting from a patch series</a></span></dt><dt><span class="section"><a href="#patch-series-tools">Other tools</a></span></dt><dt><span class="section"><a href="#problems-With-rewriting-history">Problems with rewriting history</a></span></dt><dt><span class="section"><a href="#bisect-merges">Why bisecting merge commits can be harder than bisecting linear history</a></span></dt></dl></div><p>Normally commits are only added to a project, never taken away or +done</pre></div></div></div><div class="chapter" title="Chapter 5. Rewriting history and maintaining patch series"><div class="titlepage"><div><div><h2 class="title"><a name="cleaning-up-history"></a>Chapter 5. Rewriting history and maintaining patch series</h2></div></div></div><div class="toc"><p><b>Table of Contents</b></p><dl><dt><span class="section"><a href="#patch-series">Creating the perfect patch series</a></span></dt><dt><span class="section"><a href="#using-git-rebase">Keeping a patch series up to date using git rebase</a></span></dt><dt><span class="section"><a href="#rewriting-one-commit">Rewriting a single commit</a></span></dt><dt><span class="section"><a href="#reordering-patch-series">Reordering or selecting from a patch series</a></span></dt><dt><span class="section"><a href="#interactive-rebase">Using interactive rebases</a></span></dt><dt><span class="section"><a href="#patch-series-tools">Other tools</a></span></dt><dt><span class="section"><a href="#problems-With-rewriting-history">Problems with rewriting history</a></span></dt><dt><span class="section"><a href="#bisect-merges">Why bisecting merge commits can be harder than bisecting linear history</a></span></dt></dl></div><p>Normally commits are only added to a project, never taken away or replaced. Git is designed with this assumption, and violating it will cause Git’s merge machinery (for example) to do the wrong thing.</p><p>However, there is a situation in which it can be useful to violate this assumption.</p><div class="section" title="Creating the perfect patch series"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="patch-series"></a>Creating the perfect patch series</h2></div></div></div><p>Suppose you are a contributor to a large project, and you want to add a @@ -1060,33 +1062,53 @@ and allow you to fix the conflicts; after fixing conflicts, use <code class="literal">git add</code> to update the index with those contents, and then, instead of running <code class="literal">git commit</code>, just run</p><pre class="literallayout">$ git rebase --continue</pre><p>and Git will continue applying the rest of the patches.</p><p>At any point you may use the <code class="literal">--abort</code> option to abort this process and -return mywork to the state it had before you started the rebase:</p><pre class="literallayout">$ git rebase --abort</pre></div><div class="section" title="Rewriting a single commit"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="rewriting-one-commit"></a>Rewriting a single commit</h2></div></div></div><p>We saw in <a class="xref" href="#fixing-a-mistake-by-rewriting-history" title="Fixing a mistake by rewriting history">the section called “Fixing a mistake by rewriting history”</a> that you can replace the +return mywork to the state it had before you started the rebase:</p><pre class="literallayout">$ git rebase --abort</pre><p>If you need to reorder or edit a number of commits in a branch, it may +be easier to use <code class="literal">git rebase -i</code>, which allows you to reorder and +squash commits, as well as marking them for individual editing during +the rebase. See <a class="xref" href="#interactive-rebase" title="Using interactive rebases">the section called “Using interactive rebases”</a> for details, and +<a class="xref" href="#reordering-patch-series" title="Reordering or selecting from a patch series">the section called “Reordering or selecting from a patch series”</a> for alternatives.</p></div><div class="section" title="Rewriting a single commit"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="rewriting-one-commit"></a>Rewriting a single commit</h2></div></div></div><p>We saw in <a class="xref" href="#fixing-a-mistake-by-rewriting-history" title="Fixing a mistake by rewriting history">the section called “Fixing a mistake by rewriting history”</a> that you can replace the most recent commit using</p><pre class="literallayout">$ git commit --amend</pre><p>which will replace the old commit by a new commit incorporating your -changes, giving you a chance to edit the old commit message first.</p><p>You can also use a combination of this and <a class="ulink" href="git-rebase.html" target="_top">git-rebase(1)</a> to -replace a commit further back in your history and recreate the -intervening changes on top of it. First, tag the problematic commit -with</p><pre class="literallayout">$ git tag bad mywork~5</pre><p>(Either gitk or <code class="literal">git log</code> may be useful for finding the commit.)</p><p>Then check out that commit, edit it, and rebase the rest of the series -on top of it (note that we could check out the commit on a temporary -branch, but instead we’re using a <a class="link" href="#detached-head" title="Examining an old version without creating a new branch">detached head</a>):</p><pre class="literallayout">$ git checkout bad -$ # make changes here and update the index -$ git commit --amend -$ git rebase --onto HEAD bad mywork</pre><p>When you’re done, you’ll be left with mywork checked out, with the top -patches on mywork reapplied on top of your modified commit. You can -then clean up with</p><pre class="literallayout">$ git tag -d bad</pre><p>Note that the immutable nature of Git history means that you haven’t really -"modified" existing commits; instead, you have replaced the old commits with -new commits having new object names.</p></div><div class="section" title="Reordering or selecting from a patch series"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="reordering-patch-series"></a>Reordering or selecting from a patch series</h2></div></div></div><p>Given one existing commit, the <a class="ulink" href="git-cherry-pick.html" target="_top">git-cherry-pick(1)</a> command -allows you to apply the change introduced by that commit and create a -new commit that records it. So, for example, if "mywork" points to a -series of patches on top of "origin", you might do something like:</p><pre class="literallayout">$ git checkout -b mywork-new origin -$ gitk origin..mywork &</pre><p>and browse through the list of patches in the mywork branch using gitk, -applying them (possibly in a different order) to mywork-new using -cherry-pick, and possibly modifying them as you go using <code class="literal">git commit --amend</code>. -The <a class="ulink" href="git-gui.html" target="_top">git-gui(1)</a> command may also help as it allows you to -individually select diff hunks for inclusion in the index (by -right-clicking on the diff hunk and choosing "Stage Hunk for Commit").</p><p>Another technique is to use <code class="literal">git format-patch</code> to create a series of -patches, then reset the state to before the patches:</p><pre class="literallayout">$ git format-patch origin -$ git reset --hard origin</pre><p>Then modify, reorder, or eliminate patches as preferred before applying -them again with <a class="ulink" href="git-am.html" target="_top">git-am(1)</a>.</p></div><div class="section" title="Other tools"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="patch-series-tools"></a>Other tools</h2></div></div></div><p>There are numerous other tools, such as StGit, which exist for the +changes, giving you a chance to edit the old commit message first. +This is useful for fixing typos in your last commit, or for adjusting +the patch contents of a poorly staged commit.</p><p>If you need to amend commits from deeper in your history, you can +use <a class="link" href="#interactive-rebase" title="Using interactive rebases">interactive rebase’s <code class="literal">edit</code> instruction</a>.</p></div><div class="section" title="Reordering or selecting from a patch series"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="reordering-patch-series"></a>Reordering or selecting from a patch series</h2></div></div></div><p>Sometimes you want to edit a commit deeper in your history. One +approach is to use <code class="literal">git format-patch</code> to create a series of patches +and then reset the state to before the patches:</p><pre class="literallayout">$ git format-patch origin +$ git reset --hard origin</pre><p>Then modify, reorder, or eliminate patches as needed before applying +them again with <a class="ulink" href="git-am.html" target="_top">git-am(1)</a>:</p><pre class="literallayout">$ git am *.patch</pre></div><div class="section" title="Using interactive rebases"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="interactive-rebase"></a>Using interactive rebases</h2></div></div></div><p>You can also edit a patch series with an interactive rebase. This is +the same as <a class="link" href="#reordering-patch-series" title="Reordering or selecting from a patch series">reordering a patch series using <code class="literal">format-patch</code></a>, so use whichever interface you like best.</p><p>Rebase your current HEAD on the last commit you want to retain as-is. +For example, if you want to reorder the last 5 commits, use:</p><pre class="literallayout">$ git rebase -i HEAD~5</pre><p>This will open your editor with a list of steps to be taken to perform +your rebase.</p><pre class="literallayout">pick deadbee The oneline of this commit +pick fa1afe1 The oneline of the next commit +... + +# Rebase c0ffeee..deadbee onto c0ffeee +# +# Commands: +# p, pick = use commit +# r, reword = use commit, but edit the commit message +# e, edit = use commit, but stop for amending +# s, squash = use commit, but meld into previous commit +# f, fixup = like "squash", but discard this commit's log message +# x, exec = run command (the rest of the line) using shell +# +# These lines can be re-ordered; they are executed from top to bottom. +# +# If you remove a line here THAT COMMIT WILL BE LOST. +# +# However, if you remove everything, the rebase will be aborted. +# +# Note that empty commits are commented out</pre><p>As explained in the comments, you can reorder commits, squash them +together, edit commit messages, etc. by editing the list. Once you +are satisfied, save the list and close your editor, and the rebase +will begin.</p><p>The rebase will stop where <code class="literal">pick</code> has been replaced with <code class="literal">edit</code> or +when a step in the list fails to mechanically resolve conflicts and +needs your help. When you are done editing and/or resolving conflicts +you can continue with <code class="literal">git rebase --continue</code>. If you decide that +things are getting too hairy, you can always bail out with <code class="literal">git rebase +--abort</code>. Even after the rebase is complete, you can still recover +the original branch by using the <a class="link" href="#reflogs" title="Reflogs">reflog</a>.</p><p>For a more detailed discussion of the procedure and additional tips, +see the "INTERACTIVE MODE" section of <a class="ulink" href="git-rebase.html" target="_top">git-rebase(1)</a>.</p></div><div class="section" title="Other tools"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="patch-series-tools"></a>Other tools</h2></div></div></div><p>There are numerous other tools, such as StGit, which exist for the purpose of maintaining a patch series. These are outside of the scope of this manual.</p></div><div class="section" title="Problems with rewriting history"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="problems-With-rewriting-history"></a>Problems with rewriting history</h2></div></div></div><p>The primary problem with rewriting the history of a branch has to do with merging. Suppose somebody fetches your branch and merges it into @@ -1624,7 +1646,9 @@ Submodule path 'a': checked out 'd266b9873ad50488163457f025db7cdd9683d88b' $ cd a $ cat a.txt -module a</pre><div class="note" title="Note" style="margin-left: 0.5in; margin-right: 0.5in;"><h3 class="title">Note</h3><p>The changes are still visible in the submodule’s reflog.</p></div><p>This is not the case if you did not commit your changes.</p></div></div><div class="chapter" title="Chapter 9. Low-level Git operations"><div class="titlepage"><div><div><h2 class="title"><a name="low-level-operations"></a>Chapter 9. Low-level Git operations</h2></div></div></div><div class="toc"><p><b>Table of Contents</b></p><dl><dt><span class="section"><a href="#object-manipulation">Object access and manipulation</a></span></dt><dt><span class="section"><a href="#the-workflow">The Workflow</a></span></dt><dd><dl><dt><span class="section"><a href="#working-directory-to-index">working directory → index</a></span></dt><dt><span class="section"><a href="#index-to-object-database">index → object database</a></span></dt><dt><span class="section"><a href="#object-database-to-index">object database → index</a></span></dt><dt><span class="section"><a href="#index-to-working-directory">index → working directory</a></span></dt><dt><span class="section"><a href="#tying-it-all-together">Tying it all together</a></span></dt></dl></dd><dt><span class="section"><a href="#examining-the-data">Examining the data</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees">Merging multiple trees</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees-2">Merging multiple trees, continued</a></span></dt></dl></div><p>Many of the higher-level commands were originally implemented as shell +module a</pre><div class="note" title="Note" style="margin-left: 0.5in; margin-right: 0.5in;"><h3 class="title">Note</h3><p>The changes are still visible in the submodule’s reflog.</p></div><p>If you have uncommitted changes in your submodule working tree, <code class="literal">git +submodule update</code> will not overwrite them. Instead, you get the usual +warning about not being able switch from a dirty branch.</p></div></div><div class="chapter" title="Chapter 9. Low-level Git operations"><div class="titlepage"><div><div><h2 class="title"><a name="low-level-operations"></a>Chapter 9. Low-level Git operations</h2></div></div></div><div class="toc"><p><b>Table of Contents</b></p><dl><dt><span class="section"><a href="#object-manipulation">Object access and manipulation</a></span></dt><dt><span class="section"><a href="#the-workflow">The Workflow</a></span></dt><dd><dl><dt><span class="section"><a href="#working-directory-to-index">working directory → index</a></span></dt><dt><span class="section"><a href="#index-to-object-database">index → object database</a></span></dt><dt><span class="section"><a href="#object-database-to-index">object database → index</a></span></dt><dt><span class="section"><a href="#index-to-working-directory">index → working directory</a></span></dt><dt><span class="section"><a href="#tying-it-all-together">Tying it all together</a></span></dt></dl></dd><dt><span class="section"><a href="#examining-the-data">Examining the data</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees">Merging multiple trees</a></span></dt><dt><span class="section"><a href="#merging-multiple-trees-2">Merging multiple trees, continued</a></span></dt></dl></div><p>Many of the higher-level commands were originally implemented as shell scripts using a smaller core of low-level Git commands. These can still be useful when doing unusual things with Git, or just as a way to understand its inner workings.</p><div class="section" title="Object access and manipulation"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="object-manipulation"></a>Object access and manipulation</h2></div></div></div><p>The <a class="ulink" href="git-cat-file.html" target="_top">git-cat-file(1)</a> command can show the contents of any object,
diff --git a/user-manual.txt b/user-manual.txt index 23689b0..5f36f81 100644 --- a/user-manual.txt +++ b/user-manual.txt
@@ -2006,7 +2006,7 @@ <<def_bare_repository,bare>> repository. You can also push to a repository that has a checked-out working tree, but a push to update the currently checked-out branch is denied by default to prevent confusion. -See the description ofthe receive.denyCurrentBranch option +See the description of the receive.denyCurrentBranch option in linkgit:git-config[1] for details. As with `git fetch`, you may also set up configuration options to @@ -2306,17 +2306,13 @@ these changes, just apply directly to the "release" branch, and then merge that into the "test" branch. -To create diffstat and shortlog summaries of changes to include in a "please -pull" request to Linus you can use: +After pushing your work to `mytree`, you can use +linkgit:git-request-pull[1] to prepare a "please pull" request message +to send to Linus: ------------------------------------------------- -$ git diff --stat origin..release -------------------------------------------------- - -and - -------------------------------------------------- -$ git log -p origin..release | git shortlog +$ git push mytree +$ git request-pull origin mytree release ------------------------------------------------- Here are some of the scripts that simplify all this even further. @@ -2557,6 +2553,12 @@ $ git rebase --abort ------------------------------------------------- +If you need to reorder or edit a number of commits in a branch, it may +be easier to use `git rebase -i`, which allows you to reorder and +squash commits, as well as marking them for individual editing during +the rebase. See <<interactive-rebase>> for details, and +<<reordering-patch-series>> for alternatives. + [[rewriting-one-commit]] Rewriting a single commit ------------------------- @@ -2570,72 +2572,89 @@ which will replace the old commit by a new commit incorporating your changes, giving you a chance to edit the old commit message first. +This is useful for fixing typos in your last commit, or for adjusting +the patch contents of a poorly staged commit. -You can also use a combination of this and linkgit:git-rebase[1] to -replace a commit further back in your history and recreate the -intervening changes on top of it. First, tag the problematic commit -with - -------------------------------------------------- -$ git tag bad mywork~5 -------------------------------------------------- - -(Either gitk or `git log` may be useful for finding the commit.) - -Then check out that commit, edit it, and rebase the rest of the series -on top of it (note that we could check out the commit on a temporary -branch, but instead we're using a <<detached-head,detached head>>): - -------------------------------------------------- -$ git checkout bad -$ # make changes here and update the index -$ git commit --amend -$ git rebase --onto HEAD bad mywork -------------------------------------------------- - -When you're done, you'll be left with mywork checked out, with the top -patches on mywork reapplied on top of your modified commit. You can -then clean up with - -------------------------------------------------- -$ git tag -d bad -------------------------------------------------- - -Note that the immutable nature of Git history means that you haven't really -"modified" existing commits; instead, you have replaced the old commits with -new commits having new object names. +If you need to amend commits from deeper in your history, you can +use <<interactive-rebase,interactive rebase's `edit` instruction>>. [[reordering-patch-series]] Reordering or selecting from a patch series ------------------------------------------- -Given one existing commit, the linkgit:git-cherry-pick[1] command -allows you to apply the change introduced by that commit and create a -new commit that records it. So, for example, if "mywork" points to a -series of patches on top of "origin", you might do something like: - -------------------------------------------------- -$ git checkout -b mywork-new origin -$ gitk origin..mywork & -------------------------------------------------- - -and browse through the list of patches in the mywork branch using gitk, -applying them (possibly in a different order) to mywork-new using -cherry-pick, and possibly modifying them as you go using `git commit --amend`. -The linkgit:git-gui[1] command may also help as it allows you to -individually select diff hunks for inclusion in the index (by -right-clicking on the diff hunk and choosing "Stage Hunk for Commit"). - -Another technique is to use `git format-patch` to create a series of -patches, then reset the state to before the patches: +Sometimes you want to edit a commit deeper in your history. One +approach is to use `git format-patch` to create a series of patches +and then reset the state to before the patches: ------------------------------------------------- $ git format-patch origin $ git reset --hard origin ------------------------------------------------- -Then modify, reorder, or eliminate patches as preferred before applying -them again with linkgit:git-am[1]. +Then modify, reorder, or eliminate patches as needed before applying +them again with linkgit:git-am[1]: + +------------------------------------------------- +$ git am *.patch +------------------------------------------------- + +[[interactive-rebase]] +Using interactive rebases +------------------------- + +You can also edit a patch series with an interactive rebase. This is +the same as <<reordering-patch-series,reordering a patch series using +`format-patch`>>, so use whichever interface you like best. + +Rebase your current HEAD on the last commit you want to retain as-is. +For example, if you want to reorder the last 5 commits, use: + +------------------------------------------------- +$ git rebase -i HEAD~5 +------------------------------------------------- + +This will open your editor with a list of steps to be taken to perform +your rebase. + +------------------------------------------------- +pick deadbee The oneline of this commit +pick fa1afe1 The oneline of the next commit +... + +# Rebase c0ffeee..deadbee onto c0ffeee +# +# Commands: +# p, pick = use commit +# r, reword = use commit, but edit the commit message +# e, edit = use commit, but stop for amending +# s, squash = use commit, but meld into previous commit +# f, fixup = like "squash", but discard this commit's log message +# x, exec = run command (the rest of the line) using shell +# +# These lines can be re-ordered; they are executed from top to bottom. +# +# If you remove a line here THAT COMMIT WILL BE LOST. +# +# However, if you remove everything, the rebase will be aborted. +# +# Note that empty commits are commented out +------------------------------------------------- + +As explained in the comments, you can reorder commits, squash them +together, edit commit messages, etc. by editing the list. Once you +are satisfied, save the list and close your editor, and the rebase +will begin. + +The rebase will stop where `pick` has been replaced with `edit` or +when a step in the list fails to mechanically resolve conflicts and +needs your help. When you are done editing and/or resolving conflicts +you can continue with `git rebase --continue`. If you decide that +things are getting too hairy, you can always bail out with `git rebase +--abort`. Even after the rebase is complete, you can still recover +the original branch by using the <<reflogs,reflog>>. + +For a more detailed discussion of the procedure and additional tips, +see the "INTERACTIVE MODE" section of linkgit:git-rebase[1]. [[patch-series-tools]] Other tools @@ -3721,7 +3740,9 @@ NOTE: The changes are still visible in the submodule's reflog. -This is not the case if you did not commit your changes. +If you have uncommitted changes in your submodule working tree, `git +submodule update` will not overwrite them. Instead, you get the usual +warning about not being able switch from a dirty branch. [[low-level-operations]] Low-level Git operations
